-40%

17x BMW 5 Series - E60 White LED Interior lighting kit 528i 530i 545i 550i

$ 14.22

Availability: 395 in stock
  • Manufacturer Part Number: T10 Festoon canbus 36mm 42mm Error Free
  • Other Part Number: Dome, Map, Reading, Marker, Visor, Footwell, Door
  • Warranty: Yes
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Condition: New
  • Returns Accepted: Returns Accepted
  • Brand: LEDFOOTLIGHTING
  • Item must be returned within: 30 Days

    Description

    *[msg]:
    *
    This is a COMPLETE kit (17 bulbs) - with every bulb that is inside the vehicle for the cars listed in the compatibility section.
    All the LEDs are "Xenon" White 6000K plug-and-play - no modification required - just swap out the bulbs.  If you have a different vehicle (not listed in the compatibility section)
    , see my other auctions or contact me and we can make a kit or verify fitment.
    I am a BMW owner/aficionado and an electronics engineer (20 yrs) by trade.  I had looked for a reasonably priced LED lighting kit for some time and was not successful, so I decided to source my own.  I found suppliers that make the proper sized lights and the proper dimensions, etc.  It took me quite a bit of time to find all the best lamps, now you don't have to spend your time doing the same thing - and I'll give you a good price as well!
    With other LED kits, the vanity mirror lights will flicker as the visor is opened or moved!  Not good for the girlfriend or wife approval factor...
    I was not satisfied with the performance of any of the available lights for the vanity lights, so I custom modify my own vanity lamps using modern SMD hot air reflow equipment.   BMW vanity lights are switched on by a contact inside the visor, that only supplies power to the lamp when the visor is flipped down and the mirror cover is open.  All the lights that I found on the market would quite noticeably flicker or vary in brightness as the visor is moved around or folded up/down.  This occurs due to the contact resistance inside the visor, and is imperceptible with regular incandescent lamps.  The LED lamps on the market will sharply cut off between 10-12v, so a small amount of voltage drop from the normal 12 to 14v of the battery can cause the lamp to go out or flicker.  My custom made lamps for the vanity will operate down to 5v, to vastly improve the flickering issue.
    I have hand assembled this kit from select LED manufacturers to meet my own personal preferences, which are:
    -better illumination (brighter) than stock lighting.  My wife loves the fact that she can see that no one is hiding in the car when she unlocks it at night, even with dark (15%) window tint.
    -vehicle still have a stock, but a more clean and modern look - unlike some of the kits out there with a blue tint, etc.
    -reliability - many manufacturers over-drive the LEDs with too much power to make them brighter, which causes them to overheat and wear out much faster.  I chose lamps that are being driven within specification to ensure longer life.
    -passengers will think the car is newer than it is with the clean white led glow when I open up the vehicle :)
    -no flickering when the vanity lights are operated!
    -I fine tuned the brightness of the vanity lights so they are not blindingly bright when operated at night.  If the vanity lights are too bright, they are virtually unusable for seeing your face/hair at night.
    This kit includes 17 LED lamps, This is every interior lamp, including the trunk.
    Front Map/Dome lights - 3
    Rear Map/Dome lights - 3
    Driver/Passenger Footwell - 2
    Door lights - 4
    Custom Vanity lights - 2
    Glove Box - 1
    Trunk - 1
    Trunk Gate - 1
    This kit is
    IN STOCK in Knoxville, TN
    .
    Free shipping!  -complete your transaction by 12pm EST, and the order will ship the same day.
    inkfrog terapeak
    inkFrog Analytics