Adjustable Cheek Rest for Excalibur Micro and Bulldog

Description

Adjustable Cheek Rest for Excalibur Micro and Bulldog crossbows. These are the Cheek Rests that Tyler Thompson designed and has been selling on various forums. They are 3D printed. They are available in 4 colors, Black, Brown, Green, Tan. They come with hardware included. These let you actually get a good cheek weld while shooting an Excalibur crossbow, and  A MUST if using an Optimizer type mount. The hardware is a tad snug for the factory mounting holes in the stock, and will need to be enlarged just a bit. ( The holes in stock are slightly under 1/4", and standoff hardware is 1/4" . It is a super small amount and you wont have any trouble with a 1/4" bit, "F" bit, "G" bit, or 17/64" bit., but it needs to done.)
Hardware is now black not silver as shown in one photo. Works well right or left handed. This is one of the more useful accessories for Excalibur bows to come out in a long time. The factory cheek rests are too low and wont let you get a solid cheek weld with a standard scope much less an Optimizer type mount. These let each individual adjust his rest to get the height that they prefer.