BARNETT COMMANDO 150 LB CROSSBOW, ARM, NEW MADEIN USA

Description

DO NOT SEND PAYMENT UNTIL YOU GET AN INVOICE.  SHIPPING IS SET BY EBAY PROGRAM DEPENDS ON YOUR ZIP CODE. FOREIGN SHIPPING IS VERY EXPENSIVE SO IF YOU CAN NOT PAY THE SHIPPING THAT IS ALMOST AS MUCH AS THE LISTED ITEM, DO NOT BID THERE IS 14% PACKAGING/HANDLING FEES ADDED TO THE FINAL PRICE OF THE SHIPPING
WHEN YOU ARE INSTALLING THIS ARM, MAKE SURE THAT STRING WILL REST ON THE BOLT TABLE SO THAT COCKING  ARM WILL CATCH THE STRING.  TRY BOTH WAY BEFORE YOU PUT THE STRING ON.  JUST PUT ONE SIDE ON AND PULL IT TO THE OTHER SIDE.  STRING SHOULD LAY FLUSH ABAINST THE BOLT TABLE.
LOOK AT THE ALL THE PICTURE TO MAKE SURE THAT THIS IS WHAT YOU WANT.  YOU WILL GET EXACTLY WHAT YOU SEE.
THIS IS BRAND NEVER INSTAL LED  PROD ARM MADE IN USA.   IT HAS A PAPER LABEL WITH 150 LB FOR PROD ARM DRAW WEIGHT    THE ARM HAVE 150 LB.   I HAVE NOT INSTALLED THIS ARM TO ANY COMMANDO AND HAVE NOT TEST FIRED THIS PROD ARM.  I DO HAVE IDENTICAL ONES ON MY COMMANDO AND FIRED MANY TIMES AND NEVER HAD ANY PROBLEM.  SINCE THIS IS BRAND NEW I EXPECT TO BE ABLE TO USE THIS FOR LONG TIME.
YOU ARE GETTING THIS ARM AS IS SO ASK QUESTIONS.  I ALSO HAVE INSTRUCTION ON HOW TO STRING THE PROD ARM WHEN YOU BUY THE SPCIAL CABEL TO PUT ON AD TAKE OFF STRING ON EBAY. I ALSO HAVE OVER 50 14 INCH BOLTS THAT IS RECOMMENDED FOR COMMANDO FOR SALE.  THEY ARE ON EBAY OR .00 EACH.
SHIPPING IS
CALCULATED
BASED ON YOUR ZIP CODE SET BY EBAY.
YOU ARE BUYING THIS AS IS NO REFUND SO ASK QUESTION BEFORE BIDDING
EBAY MAY CHARGE YOU YOUR STATE SALES TAX,
On May-05-21 at 19:26:30 PDT, seller added the following information:
<1>
THIS PROD IS 3/8 THICK AND 15/16 WIDE AND IS SAME LENGTH AS ORIGINAL BARNETT COMMANDO PROD ARM.  IT IS AROUND 2015 MANUFECTURED PROD ARM WITH 150 LB MARKED ON THE PAPER WITH UPC MARK ATTACHED TO THE ARM.
On May-06-21 at 13:52:14 PDT, seller added the following information:
I HAVE ONE LIKE THIS INSTALLED ON MY COMMANDO AFTER MINE SPLNTERED. ALL THE COMMANDOS ON EBAY ARE OVER 30 YEARS OLD AND MANY OF THE ARMS ARE USED AND NOT SURE OF THE CONDITION IT IS IN OR HOW LONG IT WILL LAST.  SO I LOOKED FOR THEM TO REPLACE MINE THAT BROKE.   HARD TIME FINDING ONE FOR 150 LB PROD ARM THAT FIT COMMANDO.  I FOUND A PLACE HAD SEVERAL AND BOUGHT FEW.  I WRAPPED MY PROD ARM  STREACHING AND ULLING TIGHTLY IN A 3/4 WID CLEAR GORLILLA TAPE TO PROTCT THE ARM FROM GETTING DINGS AND SPLINTERING.  THAT HAD WORKED WELL AND SEVERAL YEARS HAVE NOT HAD ANY PROBLEM WITH THE MY COMMANDO.  IF INTERESTED, I CAN SEND YOU A PICTURE OF MY WRAPPED PRODARM COMMANDO.