Crestron C2N-IO Control Port Expansion Module For Crestron 2/3 Series

Description

C2N-IO
Control Port Expansion Module
crestron.com
Fits within a 2-gang wall box behind the TPCS-4SM(D) or TSCW-730.
Provides 1 RS-232, 1 IR/serial, and 2 relay control ports
Interfaces via the Cresnet control bus
24 Volt DC Cresnet powered
The C2N-IO is a very compact device that adds control ports to any Crestron
2-Series or 3-Series control system.
It can be mounted to any flat surface using two screws or adhesive reclosable fastener.
The C2N-IO is ideally designed for use with a Crestron touch screen control system (TPCS-4SM, TPCS-4SMD, or TSCW-730),  that fits in a 2-gang US or UK electrical box. The C2N-IO can be mounted inside the electrical box behind the touch screen, or it can be installed remotely requiring just one Cresnet control cable for power and communications.
SPECIFICATIONS
Supports 2-way device control and monitoring up to 115.2k baud with software handshaking
IR/Serial:  Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
Connectors RELAY 1 – 2:  (1) 4-pin captive screw terminal block comprising (2) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; Solid-state arc suppression across contacts
COM:  (1) 3-pin captive screw terminal block, bidirectional RS-232 port; Up to 115.2k baud; software handshaking support
IR: (1) 2-pin captive screw terminal block, IR/Serial output port; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
NET: (2) 4-pin captive screw terminal blocks; Cresnet slave ports, paralleled
Controls & Indicators
NET ID: (2) Rotary switches for manually setting Cresnet ID; ‘00’ setting enables touch-settable ID (TSID)
PWR: (1) Green LED, indicates operating power supplied via Cresnet control network
NET: (1) Amber LED, indicates communication with Cresnet system
SETUP: (1) Red LED and (1) recessed miniature