Telos Z/IP ONE with AES IP Broadcast Codec 2001-00289

Description

Used Telos ZIP ONE in very good condition. Only minor scuffs and scrapes.
Fully tested and working correctly. Running V6.1 software.
Comes with power cord only.
Telos part # 2001-00289-000
Z/IP ONE is a 1 RU rack-mount IP codec for remote broadcasting. It’s a single-space rack unit perfect for studios, TOCs and remote kits. Z/IP ONE Includes a full range of codecs including AAC-ELD, AAC-HE, AAC-LD, MPEG 4 AAC, MPEG 2 AAC, MPEG Layer 2, G.711, G.722 codecs, plus linear audio and optional aptX® Enhanced coding. Z/IP ONE supports SIP 2.0 protocol and conforms to N/ACIP standards; it also works with VoIP devices and connects to compatible SIP PBXs. A full complement of I/O, including Livewire® AoIP, analog and AES/EBU, is standard.
Conformance and Compatibility:
Conforms to N/ACIP (Open) Standards. Fully supports Session Initiation Protocol 2.0 (SIP) Compatible with TCP, UDP, DNS, Zephyr Xtream®, Uncompressed PCM, and other Internet Protocols.
Codecs:
SIP: G.711, G.722, MPEGLayer2, MPEGAAC, MPEG4AACLC, MPEG2AACLC, Linear PCM, MPEG AAC-Enhanced Low Delay (ELD), HighEfficiencyAAC.
Connections:
Analog
1x Stereo input, presented on two XLR-F connections
1x Stereo output, presented on two XLR-M connections
Livewire
1x 100BASE-T connections, presented on RJ-45
AES/EBU
1x Stereo Input, presented on one XLR-F connection
1x Stereo Output, presented on one XLR-M connection
Network
2x 100BASE-T connections, presented on RJ45 (1x LAN, 1x WAN)
USB
2x A-Type, Female
Parallel (GPIO)
1x DB25, Male
Audio:
Analog Line Inputs:
Input Impedance: 6K Ohm differential
Input Range: Selectable, Line (+4 dBu nominal), Microphone (-50dBu nominal)
Selectable Phantom power
Analog Line Outputs:
Output Impedance: 50 Ohm differential
Output Clipping: +22dBu
Digital Audio Inputs And Outputs
Reference Level: +4 dBu (-20 dB FSD)
Impedance: 110 Ohm, balanced
Signal Format: AES3 (AES/EBU)
AES3 Input Compliance: 24-bit with sample rate conversion
AES3 Output Compliance: 24-bit
Digital Reference: Internal (network timebase) or external reference 48 kHz, +/- 2 ppm
Internal Sampling Rate: 48 kHz
Input Sample Rate: 32 kHz to 192 kHz
Output Sample Rate: 48, 44.1 or 32 kHz, or “sync to input” (auto-matches rate and clock from
AES/EBU input)
A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling
D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling
Frequency Response
Any input to any output: +/- 1dB 25– 20 kHz
Headroom
18 dB
Dynamic Range
87dB Unweighted
90 dB “A” Weighted
Total Harmonic Distortion + Noise
< 0.03% @ +12dBu, 1 kHz Sine
Crosstalk Isolation
> 80 dB
Power Supply AC Input
Auto-ranging supply, 90VAC to 240VAC, 50 Hz to 60 Hz, IEC receptacle, internal fuse
Power consumption: 14.2 Watts
Operating Temperatures
0-40 degrees C (32-104 degrees F), stirred air
Dimensions
19” (48.3 cm) standard rack mounting front panel
1.75” (4.5 cm) height, 6.5” (16.51 cm) depth