YAMAHA YZ65 80 85 125 250 YZ250 YZ125 & YZ65 WR SPECBOLT BOLT KIT

Description

YZ 120 PC KIT
This 120 piece "All New" HIGH QUALITY OEM style bolt kit is recommended for:
YAMAHA YZ65
YAMAHA YZ80
YAMAHA YZ85
YAMAHA YZ125
YAMAHA YZ250 THRU 2020 models
Designed to help you maintain and restore your YZ using only the original type fasteners.
FAQs
What is an OEM style bolt?
OEM style bolts
are bolts that are the same as your original bolts that came on you motorcycle from the factory. Our OEM style bolts are exact factory sizes with the same head style and strength ratings (8.8 & 10.9 grade) and meet or exceed the factory specs.
These bolts are very strong, heat treated fasteners and wont strip out or round off like cheaper grade bolts.
These are all zinc plated to look great, resist corrosion, and last the life of your motorcycle or ATV.
Can I find these at a local hardware store?
As most of us know from experience,
OEM style fasteners
are not available at our local hardware stores. The metric hex bolts found at Ace or Lowes are not the same.
These fasteners are only found at the cycle dealerships and expensive to purchase on an individual basis.
It's nice to have them on hand, right when you or your riding buddies need them.
What about OEM style nuts?
First you get the 2 square nuts used on the modern
YZs
under the rear fender. You also you get a generous assortment of flange nuts in
M6
,
M8
, and
M10
sizes. You also get nylock nuts in
M5
,
M6
,
M8
, and
M10
sizes.
What about metric washers?
Washers
are important for most everything including plastic bodywork, engine, and exhaust mounts. We include a nice variety of the most commonly found washers used on your bike.
Will I get any sealing washers?
Specbolt kits
contain 4 different, most needed sealing washers. These seals are used for your oil drain plugs, coolant drain bolts, hydraulic brake lines, etc.
What if I have aftermarket parts on my bike?
Specbolt
kits include some additional sizes to fit some of the aftermarket items on your bike as well...such as triple-clamps etc. If you want to be sure to get the right size fasteners for your specific aftermarket part...just ask. We strive to get you everything you need.
Will I get every nut and bolt found on my bike?
What isn't included?
This kit is designed as a maintenance only kit and is a great assortment of the most commonly used fasteners found all over your bike. It is not a full on restoration kit. It doesn't include shock or suspension/linkage bolts, axles/axle nuts, swing-arm bolt, and no case bolts longer than 40mm.
Check out the Racer X Garage Build done with the Specbolt YZ 250pc Kit.
Racer X Films: 2014 Yamaha YZ250 Build - YouTube
Video will open in a new window
[isdntekvideo]